Archive for January, 2017

What Car Battery Should You Choose? Absorbed Glass Mat (AGM), Gel Or Wet Cell

An electrical problem that doesn’t let your car start and leaves you stuck in a parking lot or some place away from the fix that’s needed is an unwanted problem we all do our best to avoid. So what can you do to lessen the possibility of a possible unwanted situation that involves an electrical system crash in your vehicle?

First of all make sure you spend double the money on a good car battery. A lead acid battery can cost between $75 to $125 dollars. The only reason liquid lead acid batteries are the most commonplace is liquid lead acid batteries were first developed in 1859 and they are the least expensive in today’s world of automotive engine starting sources. In 1971 the sealed liquid lead acid battery was created that made it maintenance friendly.

VRLA (valve regulated lead acid) batteries include gel and absorbed glass mate which are not liquid. Gel batteries are as the name applies which is a “Gel”. AGM batteries are silicate glass fibers mixed with boron and formed into a mat that holds the electrolyte. Non liquid gel batteries were created in the late 1920’s and lead to the creation of the “Absorbed Glass Mat” batteries in 1957. The AGM (absorbed glass mat) battery was put into production in 1972 but mostly used for military applications and non vehicle applications like boats, motor homes, motorcycles and electronics. Nowadays you see more AGM batteries becoming available for use in production cars. AGM (absorbed glass mat) batteries can cost from $160 to $250 but have more advantages over liquid lead acid batteries.

AGM batteries are basically used in applications where the use of the vehicle is only used now and again as in boats and recreational vehicles. The non use discharge rate is much lower in non use applications than liquid lead acid batteries. The charge rate is much faster also. Some automotive manufacturers are installing AGM batteries as their standard new car power source because of today’s higher vehicle power consumption. BMW right now is known to be the first to install AGM batteries in their 2007 models because of computer functions and braking.

AGM batteries are much better than liquid lead acid batteries but the downside of AGM batteries is you don’t overcharge them. They will charge faster with a normal output alternator up to 14.5 volts and a high output alternator is not needed. When an AGM battery is used in a non use vehicle a solar panel is recommended with a trickle charge. AGM batteries will go bad if charged over 14.5 volts. Most problems with charging AGM’s are in sports vehicles due to the rough environment they are used in. Toss away your old plug in garage battery charger and get a new one that maintains “Voltage” instead of amps. An AGM battery charger will sense a very low voltage in the battery and will start the recharge whereas an old charger does not sense low voltage and will not charge the battery.

These batteries are used in military vehicles that sit in storage for many years and start up after years in storage with no problem. I’ve read stories online where people have left their AGM batteries sitting in their garage for many years and they have retained their full charge. I use AGM batteries in my vehicles and disconnect the negative cable in the one that I don’t use that often anymore and it starts right up when I run the engine occasionally. I’ve read complaints about the AGM failing often but that’s only because of bad practices with them or using them in systems where the charging exceeds the recommended level. You can leave these batteries sitting for long periods of time without charging them but it’s recommended that a solar panel with an extremely low trickle charge be used when not in use. Again I will say from my own experiences is to disconnect the negative cable to the battery when not in use.

The AGM vs Gel and the wet cell? The AGM has thicker plates that tend to not warp that easily during deep discharges and resist sulfur buildup’s that destroy a wet cell battery. Wet cell batteries usually go bad after 4 years if they make it that length of time. The life expectancy of the AGM battery can be up to 10 years if not overcharged. Gel cell batteries are great for sports vehicles but tend to charge slower.

The Winner Is, “Absorbed Glass Mat” if you learn how to take care of them properly.

What Is Computer Aided Engineering And Computational Fluid Dynamics?

Computer Aided Engineering (CAE)

CAE is the broad use of computer software with the aim to aid engineering tasks. It is a broad field that involves computational fluid dynamics, finite element analysis, optimization and multibody dynamics. Software tools developed to support the activities are known as CAE tools and they can be used in different application, including analyzing robustness and also performance of assemblies and components.

Computer aided design has indeed revolutionized modern engineering as it allows easier development of products and management integration of the same. It has also made modeling greater and offers basis for virtual networking. In the engineering world, the design is used widely to develop products to meet consumer expectations. It is this knowledge that makes engineering students and professionals important because of the benefits they bring to the engineering workforce.

Using computer aided engineering designs can be simulated in all kinds of scenarios without any physical change to the model. The technology is therefore widely applied to engineering applications. It comes with drawing benefits, project management benefits and networking benefits as well. It is applied to fields like aviation, space, shipbuilding and automotive industries. Computer aided engineering systems are supportive to businesses because they can place information views into the business process and make reference architectures useful especially when it comes to manufacturing models and products.

Computational fluid dynamics (CFD)

This is a discipline that falls under computer aided engineering and is used to engineer products and process designs as well as fabricate and analyze all elements involved in the processes. The technology also falls under fluid mechanics that rely on numerical methods and algorithms to analyze and solve problems that are related to fluid flow as well as heat transfer. Computational fluid dynamics are made up of three phases:

· Pre-processing that defined computation fluid dynamics models that include physics environmental factors, geometry and boundary conditions

· Analysis which offer solution of transport equation using the computational fluid techniques

· Post processing which involves results using visualization tools

CFD started way back in the 1960s with the first successes becoming prominent in 1970s. In services industry it took effect in the 1980s and the industry significantly expanded in the 90s. CFD packages continue to develop and significant changes are definitely expected in the future. The knowledge on how fluid flow and the quantitative effects of solids that are in contact helps:

· Architects and building service engineers to provide safe and comfortable human environments

· Power plant designer to achieve maximum efficiency and also reduce pollutant releases

· Chemical engineers in maximizing yields from processing equipment and reactors

· Designers of marine, air and land vehicles to achieve maximum performance at minimum costs

· Safety engineers and risk-and-hazard analysts to make predictions of the damage extent of structures, human beings, vegetation, animals and even equipment as a result of blast waves, explosions and fires

The flow simulation also proves helpful to the metropolitan authorities in determining pollutant emissions, meteorologists in foretelling water and wind current, petroleum engineers in designing oil recovery strategies among many other applications.

Let Your Car Breathe Freely With Routine Air Filter Replacement

In a similar way to living creatures, vehicles also need to be able to freely “breathe” clean air. Of course cars do not have lungs, so when we say “breathe”, what we really mean is “filter air.” Your vehicle’s cabin air filters should be inspected and serviced on a routine basis to ensure perfectly clean and unobstructed “breathing.” For permanent filters, a professional car mechanic will clean them, dry them, and replace them as needed. For disposable ones. A simple inspection and replacement is all it takes! Continue reading to learn more about the importance of clean automotive air filters.

Defense Against Airborne Contaminants

Your vehicle’s air filters play an important role in terms of interior cabin air quality and comfort. But it also plays a significant role in how your vehicle operates. Clogged or defective filters can cause a decrease in engine performance and capacity, as well as, lose their ability to protect you against harmful airborne contaminants. You see, dirt, oil, and other harmful contaminants are trapped in air filters, and after sometime, they accumulate to mass amounts, causing the filters to lose their value. And when the filters become too saturated, they cannot trap anymore contaminants. As a result, these contaminants enter the engine and damage pistons, piston rings and bearings, cylinders, cylinder walls, and more. This causes the engine to then lose power. For fuel injected cars, air filters protect the air flow sensor from contamination.

As for interior air quality and comfort, dirty filterings can jeopardize the cabin environment. Without anything between you and airborne contaminants, you are left to suffer from dirty indoor air. This results in musty odors, stuffiness, allergy-agitation, and more. When it comes to cabin air filters, try to have them inspected and replaced every 12,000 to 15,000 miles. If you are a frequent driver or frequently drive long distances, decrease this rule to every 10,000 to 12,000 miles.

Although such an important part of car safety and maintenance, air filter replacement is often overlooked. Be sure to talk to your trusted car mechanic about recommended factory scheduled maintenance for your vehicle. They have the knowledge and advanced diagnostic systems to provide accurate and effective service for your exact make and model car or truck. They can then provide you with a trusted schedule that you can continue to use and refer to for years to come!

Call Main Street Auto Tech at 317-881-7220 for car filter replacement in Greenwood, Indiana. They are ASE certified car mechanics that offer a wide range of automotive services for all make and model vehicles, domestic or foreign. Ask them about their auto repair coupons and discounts too! Call 317-881-7220 to request a free estimate for Greenwood car maintenance, today.

How To Promote Your Business In Today’s Economy

Marketing a business is undoubtedly one of the most daunting tasks for any new entrepreneur. It’s one thing is to establish a business, but it is another thing to promote it. There are so many businesses, created by passionate people, that eventually collapse due to one reason – a lack of sales.

The purpose of any business is to sell something; either tangible or intangible. Tangible products are your tradition retail type of stores. Intangible products tend to be more service oriented. It is possible to have a combination business (such as painting; carpet installers, etc.). However, every entrepreneur is faced with the same problem of making their business known to the public in order to attract as many customers as possible.

There are many ways of promoting a business. The way you promote your business will basically depend on the type of industry your business belongs to. What works perfectly well for one business may not work for another type of business. Therefore, discretion is advised in adopting any of the steps listed below in promoting your own business:

1. Create a Website: Setting up a website is the surest way to make your business known by your potential customers. The first thing people do when trying to find out about your company is to search for it on Google. Your website has a way of creating a particular perception about your business. The more professional your website looks, the more professional your business will be perceived. The logical corollary is that you should link your social media channels back to your website.

It is not enough to just create a website, it is vitally important that you optimize your website by submitting it to major search engines like Google, Bing and Yahoo. This will enable your website to come up on those search engines whenever potential customers are searching for a product or service you offer.

2. Local Advertising: A business needs to be advertised to the people in the immediate area. A business owner may choose to advertise using billboards, posters, handbills, or any other affordable form of advertising. A company with a good budget may advertise with local newspapers, magazines, television and radio stations to attract a very large audience. Of course, this depends on the type of business you are in. An online only business might not want to try advertising on some of these outlets.

3. Conduct Social Media Campaigns: Advertising via social media is the cheapest and easiest way to reach out to your customers. Using Facebook, Twitter, Pinterest, Instagram, LinkedIn, etc. is free or relatively cheap. You have the ability to reach a larger audience than you could reach with local advertising.

There are over one billion active users on social media. Tapping into this huge resource will give you a greater chance of connecting with more people and introducing your business to them.

4. Email Marketing: Another good way of taking your business directly to your customers is by sending emails to your current or past customers anytime you have a new product. This is not a difficult task. You can do this by requesting for email addresses on your website or invoices. You can encourage your website visitors to give you their email address in exchange for a gift available for instant download to their email inbox.

5. Send another offer to customers immediately after a purchase: When a customer buys from you, introduce them to another product/service you offer. This is a great way of marketing your products to customers. Customers who buy your products have proven that they are able to pay for your products/services and that they have a level of trust with you. You should seize the opportunity to introduce other items or services you offer to them. Even though they may not buy right then, at least they know you are offering that service or item as well.

6. Ask your customers for referrals! You would be surprised at how quickly my business grew when I implemented a system of asking for referrals! I literally doubled my income in a matter of months. I also kept my schedule full of new appointments! Referrals could grow your business (online or traditional) exponentially! Think about it like this: It takes you (for example) 1000 leads to get ONE subscriber or appointment. Let’s assume you close 1 out of 3 subscribers or appointments and make them into customers. So it takes you 3000 leads to get ONE customer. If each customer provides you with three referrals, and the same ratio holds true (which it should double because your customers are not going to send you to people to make them mad – they will send you to people they know need your services), now each one of those purchased leads results in TWO sales! Then you ask that customer for three referrals – and the cycle keeps going.

These are just some of the ways in which I have built my business. Some of these techniques may not work in your business niche. If any of them do apply and you are not currently trying these ideas – give them a try! The results could, literally, catapult your business to the next level!

The Best Places For Destination Weddings

Wedding bells are ringing everywhere! If you’re someone who is planning to get married on the coming year then you need to read what we have to say before you make any further wedding plans. For all us, the day we get married is probably the most important day of our lives and we want to make sure it is arranged that way as well. To do that, you don’t necessarily have to throw a grand wedding at the most expensive place around. A simple and much cheaper alternative is to get married at one of the following locations which are known for their exotic beauty and their services all of which are at your beck and call for very economical prices. And before you move on, here’s a tip – if you’re planning a destination wedding make sure you book flight tickets well in advance!

1. Belize:
This place is on top of our list of wedding destinations and the reason for that is because it offers so much for so little. The place has some extremely beautiful destinations and rainforests as well as old Mayan ruins. Oh and let’s not forget that this place is also home to the second largest barrier reef in the world. The best thing about this place is that instead of being filled with expensive resorts like most of the other exotic travel locations, it has a lot of economical lodges and the sea food here is divine yet cheap too. So you can even host a wedding feast filled with exotic sea food but still save a lot in your pocket.

2. Jamaica:
The best thing about Jamaica is that it provides you with a choice of two very different and equally beautiful locations. You can choose to get married on the white sandy beaches or near the Rocky Mountains depending on what you like. Or maybe you could get married on the beach and throw the dinner or reception in the mountains to get the best of both worlds. And on top of that, the arrangements here are really cheap as compared to other travel destinations.

3. Vermont:
This small collection of beautiful landscapes and homey villages is probably the best travel destination to get married in. The scenic beauty here gives you the perfect backdrop to take your wedding vows and have a fun pre or post wedding shoot too. There are a lot of cozy and warm bed and baths here as well as halls where you can hold your wedding party. And the best part of this is that you can get all of this at very very economical prices.

Now that you know the best places to get married in, we suggest that you start planning for your perfect destination wedding and make sure you book flight tickets well before time so as to avoid any unnecessary delays and problems in your plans! All the best! Cheers to new beginnings!

Social Media: Why Do Some People Look Towards Social Media To Give Them Approval?

In the beginning, it could be said that people generally used social media to get in touch with their friends and family; the people who they actually knew. But as time has passed, this is no longer why a lot of people use it.

As for the people who only use it to stay in touch with their friends and family, it is likely to be no different to how it was when they first started using it. Now, they might notice that the site they use no longer looks the same as it did or that others use it differently, but that could be as far as it goes.


If one only added people who they knew when they first started, there is the chance that this is no longer the case. Even if they have only met someone once, they could still end up adding them to their ‘friends’ list.

When this takes place, they might only be thinking about how this will have an effect on how other people perceive them. For example, if one has a certain number of ‘friends’, they can end up being seen as popular.

One Purpose

What this can then show is they are more concerned with how they look than they are with connecting to others. This doesn’t mean that they won’t talk to others; it just means that it is unlikely to be their priority.

And if one has this approach when they go online, there is a strong chance that they have a lot of ‘friends’ who are just the same. In addition to this, it might also be important for them to look right in other ways.

The Perfect Life

What this can then mean is that they will want other people to believe that they live the ultimate life. As a result of this, they are going to have to be very careful when it comes to what they share.

It will be vital for them to share pictures where they are having a good time, and being in exotic locations will also help. If one looks as though they are enjoying themselves in a warm country, it can be normal for people to believe that they lead a good life.

The Right Image

Along with this, one can also have the need to look right, and this is going to be relatively easy. Not only can they choose what pictures to upload; they can also change how they look.

Through using the right angle and the right light, one can take pictures where they look their best. Once this has taken place, one can make a few major or minor changes to the images.

An Act

In this sense, it might be accurate to say that when one uses social media, they are putting on a performance. This is their stage, and they are choosing to be someone who has their life together.

But like someone who acts in the real world, they are not going to be able to truly connect to anyone when they are playing a role. Who they are has been put to one side, and their needs are going to end up being unmet.


When one has this approach when they go online, it is likely to show that they have a strong need for approval. If their ‘friends’ don’t give them the kind of feedback that they need, they could end up being in a bad way.

However, this doesn’t mean that this is the only way they will come across when they are this way. For one thing, one might not try to create the impression that they lead the perfect life, and they might not even edit their pictures.

A Number of Ways

One could receive the approval they need through posting funny videos or memes that make people think about the world differently. What this shows is that one is not going to need to rely on their appearance and neither are they are going to need to travel all the time.

And as long as they have some kind of device, it can allow them to receive approval whenever they need it. It is then not going to be necessary for them to delay gratification; they can fulfil this need instantly.

A Closer Look

When it comes to the people who behave in this way and the people who don’t, it is clear that there is a big difference. What this can show is that the people who do need a lot of approval are emotionally dependent on others.

As they are unable to handle how they feel, they need other people to regulate their inner world. But this is not the only thing that can be involved here; they can also be in a position where they haven’t got any close friends.

One Direction

If they had people around them who they were close to, they would be able to receive the approval and the validation they need from them. And through having the ability to regulate their inner world, they wouldn’t depend on other people to do it for them.

The reason one doesn’t experience life in this way and looks towards social media to give them approval can be the result of what took place during their early years. This could have been a time when they didn’t receive the kind of care that they need in order for their brain to develop in the right way.


The ability to regulate their emotions wouldn’t have developed, and this would have stopped them from feeling comfortable enough to reach out to others when they need them. Ultimately, no one is their own island, and this is why human beings need other people.

But when one doesn’t receive the right care, it can set them up to be dependent on others, or to go the other extreme and become extremely independent. What this emphasises is how important it is for children to be brought up in the right way, and for there to be help available when this doesn’t happen.

Prolific writer, author, and coach, Oliver JR Cooper, hails from England. His insightful commentary and analysis covers all aspects of human transformation, including love, partnership, self-love, and inner awareness. With over one thousand two hundred in-depth articles highlighting human psychology and behaviour, Oliver offers hope along with his sound advice. His current projects include ‘A Dialogue With The Heart’ and ‘Communication Made Easy’.

5 Ways of How to Destroy a Business Partnership: Don’t Start That New Business Until You Read This

Let any one of these 5 situations into your business and you’ll ravage your entrepreneurial career:

1st – Stop needing each other:

There’s a considerable chance that the partnership power and responsibility structure will start to shift and will look very different starting anywhere from 3-12 months after inception.

In the beginning of any new venture, a dynamic and compelling new venture phenomenon, made up of fear, anxiety, stress and excitement, emerges and makes for an impressive personal barrier disintegrator. No facades and no charades are the hallmark of a new venture. The partners forget about their own needs and are on their best behavior. Everyone is madly in “love.”

“Needing each other” is a compelling power source in successful business partnerships. In most partnerships that “need” is the bond that keeps it all together. As time passes, especially after the 12th month of being in business, everything and everyone starts to shift, evolve and a displacement arises that will be unsettling and transformative for the business and all the players.

See #4 for more information on “not needing each other”

Solution: Accept the fact that the above information is valid. Discuss it openly with your business partners. Be vigilant and sensitive to your business partners and what they say and do and how they say it and do it. You don’t have to be “a touchy feely kinda person.” Think selfishly. Think protection for your future. Think protection for your business’ future. Communicating, openly and civilly, is the only preventive measure that will increase the chance for a favorable outcome.

2nd- Allow your significant other to point out all the expensive gifts your partner’s significant other is receiving and they’re not:

Significant others, and other family members, can be the source of great pain and distress when it comes to the relationship you have with your business partner.

Greed, jealousy, being overcritical, being generally resentful, tactless and being superficial are some of the flies swimming around in the business partnership ointment. Money and power sometimes brings out the worst in “significant others” and family.

Solution: There’s two parts to the solution:

a-It’s the smart business person who pays extreme attention to the health and tone of his business partnership. It should be the number one concern, above and beyond anyone else in your life. I know I’ll get a lot of Boos and Hisses but, if you take care of your business and the business partnership, it will always take care of you and the people you love and who love you. Everyone will be happy and satisfied.

b- Going to, or inviting in, a counsellor or therapist to meet privately once a month, individually and aggregately, with the business partners will always be money well spent. I’ve seen the wreckage that family members have created in some very successful businesses.

You will have partnership strife and discord. Bet on it. Prepare for it now and have the preventive and supportive resources at the ready and/or in play from the beginning. It will be a shame if one day you’re standing outside your padlocked office wondering what happened.

3rd – Have sexual relations with a family member of your business partner:

I “feel” the smirks already. Talk about destruction. This is an insidious act of extreme betrayal. It not only will leave your business ripped apart, it will destroy precious family and personal relationships. People will be crushed and devastated for a lifetime.

The reputations of all the partners will be tainted. You’ll be amazed and appalled at the same time to find out how many suppliers, banks and customers will turn their back on you. They know that with a soiled and stained situation like this, destruction and failure may be close by. No one wants to be part of this, especially if it hurts them financially. Something many people take for granted is that It takes years to build a reputation that’s respected and trusted. It takes 24 hours or less to blow it up.

Are you are going to make your bed and Lie in it, or not?

Solution: If you’re over 18, take a wild guess. Under 18? Talk to someone over 18.

4th – Do some self-talk about how you deserve more money than your business partner:

“I’m working so much harder than her.” “He was supposed to be the sales end of our business but…” “Our biggest customer can’t stand her.” “He can’t handle the pressure.” “I never realized how much she talks.” Do I need to go on? You may recognize one of these.

In the beginning of a new venture there’s “reality” and there’s “wishful and well-intentioned thinking.” The responsibilities and strengths that you bring to the new venture are not necessarily the responsibilities and strengths that will be in play when things get started and are rolling along.

Being aware of each partner’s powerful strengths and their ‘vulnerabilities’ will allow weekly partner meetings to be productive and allow for everyone to be open, honest and transparent. Staying flexible and being willing to adapt, not only leads to a sustainable business but what’s more exciting is, it leads to personal growth for all the partners.

Solution: There’s 3 parts to the solution.

a-Mandate, enforce and re-enforce up close and personal, respectful and empathetic communication meetings on, at least, a weekly basis. These meetings are confined to the partners only and are done behind locked and closed doors. Bring in food. Do not go to a public place to talk.

b- There are always 3 realities: Yours, theirs and the business’ reality. Work with the reality of the business only and adjust your life to the needs of the business. I repeat, make your business the priority above and beyond all others and the “others” will have a phenomenal life.

c- Accept as fact, that you may have to change your place and responsibilities in the business as time passes. Welcome it with open arms. If you have a problem with this I say, respectfully, get a therapist as soon as possible. Your reluctance is connected to, and about, ego, self-image and self-confidence. It pays to have someone help you disentangle your emotions and consequently save your entrepreneurial career.

5th -Start the new venture on a 50/50 ownership platform:

If you’re forced to initiate an equal stock partnership, then having or learning patience, empathy, and anger management becomes even more crucial and essential than ever before. A 50/50 is fine until the “cracks” start to appear. If you don’t follow the advice in step #4, it could be the beginning of the end for everyone.

Some interesting points:

a-In a partnership breakup your net worth is never, I repeat, never what you think it is. It’s always much less.

b-Banks, customers, suppliers and even employees will scatter when they get a whiff of bad news on the horizon. Your net worth could entirely dissipate in the time it takes you to say “Wait, I changed my mind.”

c-Make the partnership agreement as simple as possible (two pages is good) or you’ll find that the lawyers will make more than you.

d-You could make a 51/49 % stock ownership with a 50/50 % profit split. It’s worth it to give up more on the profit split in order to get 51% ownership of the company. In any event, no matter what you decide it’s always wise to have salaries, expenses and benefits remain equal.

Solution: See the solution in step #4

“Now go with your eyes wide open”… Good Luck out there.

A Personal Note:

I’ll be accused of being negative and shortsighted. My response: That’s Crap. This is reality. This is life. It’s raw, pure, up close and certainly personal.

You don’t like the article? I understand. The truth and reality have a way of making people feel uncomfortable.

Just do me one favor. Print it and put it in a drawer, in a sealed envelope. Open it 12 months to the day that you started your business. If I was right you unfortunately learned a valuable lesson and if your verdict is that I was wrong, please take a closer look and search for cracks in the partnership relationship. You may be in the “subtle stage.”

Partnerships are great when they’re solid and built on mutual respect. Unfortunately, this is not a perfect world. This article is about possibilities that you must be aware of and in tune with. Consider this article a practice “fire drill.” Adapt now, because when the flames start to roar, it’s too late.

This article is about coating your business relationship with empathy. It’s about knowing that you’re not only responsible for your welfare and performance, but you’re also responsible for your business partners state of being. I’m not advocating that you become super-parent. I’m advocating for you, and this article is all about your protection and your financial and mental well-being.

Once again. Good luck out there and never, ever give up on your dreams.

A Heartfelt New Year’s Resolution: Show You Care

I heard the sirens behind me before I saw the flashing lights of an ambulance, followed closely by a fire truck. Like everyone else on the roadway, I looked around trying to figure out where the ambulance was heading, and as soon as I saw the lights, eased my car over to the right side of the road. Only the ambulance wasn’t traveling in the direction of traffic, the ambulance was heading for whichever side of the roadway was clear, if only for a few car-lengths – much to the surprise, no doubt, of those in the oncoming lane of traffic.

I figured it must be a truly urgent emergency for the ambulance and fire truck to be commandeering both sides of Pacific Coast Highway. Nonetheless, drivers on either side were nudging their cars onto the side, out of the way. At no time did the ambulance have to blow its horn, slow down, or do anything else to get where it needed to go.

We care. We really do. In moments of crisis, large or small, our respect for one another simply as human beings, shows up. I am reminded of a very touching video posted in the final weeks of the chaotic Presidential campaigns, which featured a woman trying to find the owner of a lost dog found wandering in a parking lot. It was an “equal opportunity” posting, in that the same situation was played out in both Trump and Clinton rallies. The woman wore a “Trump” t-shirt in the Clinton situation, and a “Clinton” t-shirt in the Trump situation. Didn’t matter. People in both rallies, without exception, treated the woman with respect, and tried their very best to help her find the dog’s owner. Small crisis, true, but oh-so-telling.

We care. We really do. So what if, this New Year, we made a resolution to show our caring, our respect for our shared humanity, when it isn’t a matter of a lost dog or tragic accident? What if, just as a matter of course, throughout our most ordinary of days, we made the effort to give people the benefit of the doubt, to assume people are doing their best (including ourselves!), and to respect them, regardless of whether or not we agree with them?

I know, it’s easier to do with lost dogs than it is with co-workers or family, much less strangers who are rude to us or ignore us altogether. But heck, we’re still all in this together, and a little bit of respect and consideration goes a long way.

And who knows? Someone may give you some of that respect and consideration when you least expect it, in a most delightful way.

Why So Many People Will Talk You Out of Online Marketing

In this modern society where almost everything is digital, it is hard to believe that there are still those who prefer traditional methods, such as in the field of advertising.

Online advertising has been a hit in the last decade. Internet marketing has taken over businesses by storm and doubled their revenue. However, some people still see the field as unnecessary and taxing so they try to convince others to veer away. Below are other reasons why some individuals dislike online marketing:

Inability to adapt with technology
A person may refuse the method because they may not be technology savvy. They are afraid that technology is hard to monitor or manipulate so they choose to stay manual.

Mastery of craft
A lot of traditional people spent years perfecting their craft, so they believe that their capabilities are sufficient. Online marketing is a threat to physical advertising because it minimizes the need for logistics, hence the repulsion.

Less Jobs
Some people think that digital work reduces employment opportunities due to computers replacing manual labor. Only a handful of people are necessary to make internet marketing work.

Information Breach
Putting everything on the internet is a risk for hacking or information leakage that’s why many are skeptical about it. Online marketing requires a substantial amount of data that can be easily stolen or erased.

Lack of Equipment
Many marketers don’t have reliable internet or computers to handle critical work. Manual advertising is easier to delegate and segregate, so smaller businesses prefer it.

Lack of Empathy
Advertisers believe that online marketing is not good for client relations because it promotes a more detached form of communication and a robotic response. Manual advertising is more personal so it is easier to convince people.

Lack of Authenticity
Marketers are wary of online advertising because people nowadays are harder to convince, especially in terms of the authenticity of a product. Since everything can be manipulated or edited, they would have to work more to attract clients.

Population of Non-internet users
A big percent of the population is still manual so it is impractical to promote online marketing in these areas. Online commercials only work with regular exposure but if the audience only uses the internet a few times then it is a wasted effort. Manual advertising is beneficial when people are more inclined to support physical efforts or are part of a community network.

Promotes Mediocrity
Senior marketers believe that online marketing encourages laziness in the younger advertisers because most materials can be recycled, edited or rehashed. Marketing is a skill developed from experience and virtual training may not be enough to develop and create a better breed of advertisers.

Technology is a waste
People believe that using gadgets and computers are harmful to the health of workers so they don’t encourage the employment related to such. Manual advertising promotes brain functions through practice and personal relationships development. It is important for some people to backlog technology to help the environment.

Despite the many reasons why people may talk you out of online marketing, it is still undeniable that this form of marketing has a lot of potential. Learn how you can maximize the web when it comes to marketing your products and services, so you can expand your reach.

John Richards has many years of experience creating and developing books, eBooks, manuals, and videos, on a variety of subjects, including online wealth, pet care, Internet marketing, direct mail, health and wellness, and CD/DVD distribution service. John’s website provides ideas and practical advice for people who want to enjoy the rewards of earning an income from home using simple websites.

All You Need To Know About The PTFE Ring Gasket

Gaskets are one of the basic elements for preventing the leakage, mist formation, and spray outs after the flange guards. They are installed at the flange joints, pipelines or valve joints, etc. to prevent the leakage of the harmful gasses and liquids from the gap between the joints. The gaskets are proven to seal the gap between the surfaces of the joints and provide better protection at an affordable price. They bear the high pressure of the high-temperature chemicals and have corrosion resistance properties. They are used in many industries like automotive, aerospace, chemical industries, electronics, military industries, pharmaceuticals and appliances.

The Types Of The Loads That A PTFE Ring Gasket Bear Are As Follows:-

The initial compressive load is the bolt load which pulls the gasket material into surface defects to form a strong seal.
The hydrostatic end force which tends to separate the surfaces of the flange joints when the arrangement is over pressurized.
The internal load pulling the part of the gasket exposed to inner force. It tends to blow the seal out of the joint.
The various metals and materials are used to make gaskets which can meet the demand of various industries. The range covers non-metallic, semi-metallic and metallic gaskets. The industries mostly install PTFE ring gaskets which are made up of a material and provide better performance in the operation.

This type of the gaskets used widely in the chemical industries and pharmaceuticals because it avails numerous benefits, besides acting as the protective seal for the leakage. It reduces friction to provide a rigid usability and avoid any of the damage or failures.

There Are Many Factors That Are Affecting The Performance Of The Gaskets:-

The Flange Load – The pressure on the two surfaces of flange joints churns the product and compresses the gasket to create an even tighter seal. The gaskets are enough tough to bear this load and the bolts of the joints should be tightened enough to create a perfect seal.

Temperature – The high temperature sometimes affects the efficiency of the product, but the gaskets are made of the high-grade material which is actually temperature resistant.

Fluid – The chemicals flowing through the pipelines is highly corrosive in nature and the liquids are harder to sell in comparison to the gas. The PTFE ring gaskets seal the liquid and prevent it from flowing outside. The product also prevents the contamination of the liquid.

Page 1 of 3123
Go to Top